Error detection device Safety stop
Safety stop SS-636/SS-636C/SD-4G is an error detection device that prevents damage to the mold by incorporating ejection detection, feed error detection, wave detection, material end detection, etc. in automatic press processing.
It monitors the status of the sensor connected to SS-636/636C and determines whether it is normal or abnormal with a timing signal synchronized with the operation of the press machine. If there is any abnormality, stop the press machine. SS-636C has a preset counter. Since the machine can be stopped at the set numerical value, it is useful for managing lot production.
In addition, by incorporating a function to prevent momentary stoppages, which has been a problem until now, highly efficient work has become possible.
Error detection device Light sensor
The light sensor SL-31 is a U-shaped sensor that can detect feeding errors when cutting out materials.
Used by connecting to safety stop SS-636/636C.
The magnetic sensor SE-30 is a loop-type magnetic sensor used for checking the ejection of air-blown workpieces.
A protector attached to the sensor facilitates detection.
It also reliably detects both slow and fast moving products.
Used by connecting to the safety stop SS-636/636C.
Digital cam
Cam Controller DCR-361 This is a device that reads the rotation signal of the press machine with an encoder attached to the rotary shaft and obtains a contact signal equal to or greater than that of a rotary cam.
The DCR-361 sets the ON and OFF angles, and when the ON angle and the angle from the encoder match, the cam output is turned on, and similarly when it matches the OFF angle, the output is turned off.
The cam output is 8 channels, and the ON/OFF contact output can be reversed.
